LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1154 (Rear Axle - Tightening Torques - AWD) >> 17 Final Drive Mounting >> 33 17 Rear axle differential mountings

33 17 Rear axle differential mountings

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 335xi, 2008 BMW 328xi, 2007 BMW 335xi, 2007 BMW 328xi, and 2006 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
REAR AXLE DIFFERENTIAL MOUNTINGS - TIGHTENING TORQUE SPECIFICATION

  Type Thread Tightening specification Measure
1AZ Rear differential (if nec. with bracket for vibration damper) to rear axle carrier E81, E87, E90, E91, E92, E93 M12 (front) Observe repair instruction. 100 Nm
  E81, E87, E90, E91, E92, E93 M14 (rear) Observe repair instruction. 165 Nm
      Replace nut  
2AZ Vibration damper to bolt connection, rear differential E81, E87, E90, E91, E92, E93 M12   68 Nm
3AZ Vibration damper on bracket E81, E87, E90, E91, E92, E93 M12   68 Nm