11 31 Camshaft
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CAMSHAFT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Chain tensioner | S85 | M26x1.5 | Insert screws dry | 50 Nm |
| 2AZ Bearing pin to crankcase and both cylinder heads (sliding rail) | S85 | M6 | 10 Nm | |
| 3AZ Short and long bearing pins to crankcase (chain rail) | S85 | M8 | 15 Nm | |
| 4AZ Bearing cap of camshafts to cylinder head | S85 | M7x1 | 13 Nm |