12 41 Starter and Mounting Parts
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2010 BMW X5, 2010 BMW 650i, 2009 BMW X5, 2009 BMW 650i, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
STARTER AND MOUNTING PARTS TIGHTENING SPECIFICATION
| Type | Thread | Measure | ||
|---|---|---|---|---|
| 1AZ | Starter motor mounting to transmission bell housing | All, except N51, N52, N52K, N53, N54 | 45 Nm | |
| 2AZ | Support to starter | All | M5 | 5 Nm |
| 3AZ | Support to crankcase | All | 47 Nm | |
| 4AZ | Electrical leads to starter | |||
| All | M5 | 5 Nm | ||
| All | M6 | 7 Nm | ||
| All | M8 | 13 Nm | ||
| 5AZ | Bolt connection, pole tube | All | M6 | 6 Nm |
| 6AZ | Heat shield to starter motor | M6 | 6 Nm | |