12 31 020 Removing and installing or replacing alternator (N62)

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2010 BMW X5, 2010 BMW 650i, 2009 BMW X5, 2009 BMW 650i, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Switch off ignition
Disconnect battery negative lead. See 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
Remove fan cowl with electric fan.
Remove alternator drive belt.

IMPORTANT: Risk of damage Cover radiator.

If fitted: Unscrew nuts. Place holder (1) for refrigerant line (2) to one side. Release screw. Place holder (3) for hydraulic line (4) to one side.

Fig 1: Place Holder (1) For Refrigerant Line (2) To One Side

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1) and release screw underneath. Remove deflecting element (2).

Fig 2: Remove Cover (1) And Release Screw Underneath

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws. Tightening torque, see 12 31 1AZ in 12 31 ALTERNATOR WITH DRIVE AND MOUNTING PARTS . Pull alternator (1) forwards until connections are accessible.

Fig 3: Pull Alternator (1) Forwards Until Connections Are Accessible

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug (1) and remove. Remove cover (2) and release nut underneath. Tightening torque, see 12 42 1AZ in 12 42 STARTER LINE . Disconnect battery positive lead from alternator. Remove alternator.

Fig 4: Unlock Plug (1) And Remove

Courtesy of BMW OF NORTH AMERICA, INC.