33 4 400 Puller fixture
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
Note: For removing inner wheel bearing on rear axle
Series: E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, RR1
SI number: 1 05 99 (426)
Order number: 33 4 400
Puller fixture
Consisting of:
1 = 33 4 401 Basic body
2 = 33 4 402 Spindle
3 = 33 4 403 Wrench, large
4 = 33 4 404 Wrench, small
5 = 33 4 405 Clamping pliers (45...51 mm)
6 = 33 4 406 Clamping pliers (50...55 mm)
7 = 33 4 407 Clamping pliers (55...61 mm)
Note: Model series: E67