33 3 310 Removal/installation tool kit

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Fig 1: Identifying Special Tools (33 3 310) Assembly And Components

Courtesy of BMW OF NORTH AMERICA, INC.

In conjunction with: 33 4 181 (E46)

Note: For removing and installing rubber mounts in rear axle suspension, front and rear

Series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E81, E83, E85, E86, E87, E90, E91, E92, E93, R53, RR1

Storage location: A7

SI number: 1 05 90 (207)

Order number: 33 3 310

Removal/installation tool kit

Consisting of:

1 =333311 Locator sleeve

Note: For removing and installing rubber mount / model series: E31, E36

2 = 33 3 312 Thrust piece

Note: For removing rubber mount differential cover / model series: E31, E36, E38, E60, E61, E63, E64, E65, E66, E67, RR1

3 = 33 3 313 Thrust piece

Note: For installing rubber mount on rear differential cover - model series: E31, E36, E38 For removing rubber mounts rear differential cover - model series E46

4 = 33 3 314 Spindle

Note: For removing and installing rubber mount Model series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E85, RR1

5 = 33 3 315 Nut with bearing

Note: Model series: E31, E36, E38, E60, E61, E63, E64, E65, E66, E67, E85, RR1

6 = 33 3 316 Thrust piece

Note: For installing rear rubber model rear axle carrier / model series: E31

Note: In conjunction with: 33 3 333 and 33 3 334