33 3 260 Set of tools

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Fig 1: Identifying Special Tools (33 3 260) Assembly And Components

Courtesy of BMW OF NORTH AMERICA, INC.

Note: For removing and installing rear wheel bearings in wheel carrier and for fitting drive flange

Series: E31, E34, E38, E46/16, E52, E53, E61, E67, E81, E83, E85, E86, E87, E90, E91, E92, E93, RR1

Storage location: B7, B8

SI number: 1 05 90 (207)

Order number: 33 3 260

Set of tools

Consisting of:

1 = 33 3 261 Spindle with 2 nuts

Note: Model series: E31, E34, E38, E46/16, E52, E53, E60, E61, E83, RR1

2 = 33 3 262 Spacer sleeve

Note: For removing wheel bearing wheel carrier and installing drive flange Model series: E31, E34, E38, E46, E52, E53, E83

3 = 33 3 263 Adapter sleeve

Note: For removing wheel bearing from wheel carrier - Model series: E31, RR1

4 = 33 3 264 Adapter sleeve

Note: For installing wheel bearing wheel carrier Model series: E31, E34, E38, E46/16, E52, E53, E83, RR1

5 = 33 3 265 Thrust washer

Note: For installing wheel bearing wheel carrier - Model series: E31

6 = 33 3 266 Adapter sleeve

Note: For installing drive flange and removing wheel bearing Model series: E38, E52, E53, E60, E61, E83, RR1

7 = 33 3 267 Thrust washer

Note: For installing drive flange Model series: E31, E34, E38, E46/16, E52, E53

8 =33 3 268 Support disk

Note: For installing wheel bearing Model series: E38, E52, E53, E60, E61, E83, RR1