33 1 300 Rillex tapered roller bearing extractor

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rillex Tapered Roller Bearing Extractor (33 1 300) Compontents And Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

Note: For bevel pinion and differential case (final drive) / for mounting sprocket wheel on crankshaft (M70) / for removing bearing inner race from drive flange (E36, E46)

Transmission: Rear axle differential type G, K, M

Storage location: B6, C6

Order number: 33 1 300

Rillex tapered roller bearing extractor

Consisting of:

1 = 33 1 301 Connecting piece with spindle

1 = 33 1 311 Gripper

2 = 33 1 312 Thrust piece

Note: For removing bearing inner race from drive flange - Series: E36/5

In conjunction with: 00 7 500

5 = 33 1 305 Thrust piece (old)

6 = 33 1 306 Thrust piece

7 = 33 1 307 Thrust piece

8 = 33 1 308 Thrust piece

9 = 33 1 309 Thrust piece

Note: For final drive and for mounting sprocket wheel on crankshaft (M70)

In conjunction with: 00 8 500