23 0 020 Holder

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 328xi, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For all three- and four-hole flanges during releasing and tightening down

Series: E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92

Transmission: A4S 200R, A5S 360R, A5S 390R, GA6 HP19Z, GS6-17BG, rear diff. type M, S5D 200G, S5D 250G

Storage location: A1, B1, C1

Order number: 23 0 020

Holder

Fig 1: Identifying Special Tool (23 0 020)

Courtesy of BMW OF NORTH AMERICA, INC.