21 2 140 Clutch centering mandrel (2 x)

WARNING: This page is about a different car, the 2006 BMW 330xi, 2006 BMW 330i, 2006 BMW 325xi, 2006 BMW 325i, and 2006 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For centering clutch disc on flywheel while installing self-adjusting clutch (SAC) - Phase-in of SAC in E46, 09/97

Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z, S6S 420G, S6S 560G

Storage location: C5

SI number: 1 13 96(104)

Order number: 21 2 140

Clutch centering mandrel (2 x)

Consisting of:

1 = 21 2 141 Clutch centering tool

Note: With M10 screw - Transmission: S6S 420G, S6S 560G

2 = 21 2 142 Clutch centering tool

Note: With M10 screw - Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z

Fig 1: Identifying Clutch Centering Mandrel (21 2 140)

Courtesy of BMW OF NORTH AMERICA, INC.