00 2 480 Measurement stand with clamp

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N52, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, W10, W11, W17

SI number: 118 99(489)

Order number: 00 2 480

Measurement stand with clamp

Consisting of:

1 = 00 2 481 Clamping foot

2 = 00 2 482 Clamping piece

3 = 00 2 483 Shaft

4 = 00 2 484 Shaft

Fig 1: Identifying Measurement Stand With Clamp (00 2 480) Components And Assembly

Courtesy of BMW OF NORTH AMERICA, INC.