00 2 300 Assembly stand with universal flange

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For accommodating engines from S85

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47T2, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57T2, M57TU, M60, M62, M62VAN, M67, M67TU, M70, M73, M88, N40, N42, N45, N46, N51, N52, N53, N54, N62, N62TU, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, S85, W10, W11, W17

SI number: 01 25 04 (155)

Order number: 00 2 300

Assembly stand with universal flange

Consisting of:

1 = 00 2 301 Assembly stand

2 = 00 2 302 Universal flange

3 = 00 2 303 Crank

4 = 00 2 304 Protection hood

5 = 00 2 305 Storage for small parts

6 = 00 2 306 Molded tray, rear

7 = 00 2 307 Oil drip tray

8 = 00 2 308 Molded tray, front

Fig 1: Identifying Assembly Stand With Universal Flange (00 2 300) Components And Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

9 = 00 2 309 Wheel, front (without stop)

10 = 00 2 311 Wheel, rear (with stop)

11 = 00 2 312 Set of rippled mats