64 52 A/C compressor
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - A/C COMPRESSOR
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E36/7 M54, E36/7 S54, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | M8 | 18.5-20 Nm | |
| 2AZ Filler plug, A/C compressor | E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | 30±1 Nm | ||
| 3AZ A/C compressor to carrier | E90, E91, E92 | M8 | 19 Nm | |
| M54, N62, S85, N54 | M8 | 21 Nm | ||
| N45, N46, M47T2, M57TU, M57T2 | M8 | 19 Nm | ||
| N52 | M8 x 87 | Replace aluminium screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 180±15 ° | |||
| N53 | M8 x 52 | Replace aluminium screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 90±15 ° | |||
| N53 | M8 x 87 | Replace aluminium screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 180±15 ° | |||
| E85 S54, E86 S54 | 20 Nm | |||
| 4AZ Belt pulley / hub to A/C compressor | M47T2 | 35±5 Nm | ||
| 5AZ Bracket, A/C compressor to lower crankcase | N54 | 19 Nm | ||
| 6AZ Cable holder to A/C compressor | M47T2 | 3 Nm |