51 23 Hood/bonnet locks
WARNING: This page is about a different car, the 2006 BMW 330xi, 2006 BMW 330i, 2006 BMW 325xi, and 2006 BMW 325i. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - HOOD/BONNET LOCKS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E81 / E87 / E90 / E91 / E92 / E93 | 10 Nm | ||
| 2AZ Lock to body (replace microencapsulated screws) | E70 / E81 / E87 / E90 / E91 / E92 / E93 | 10 Nm | ||
| 3AZ Upper lock section (striker) to bonnet/hood | E70 | 10 Nm |