33 21 Output Shaft
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 BMW 335i, 2008 BMW 328i, 2007 BMW 335i, 2007 BMW 328i, and 2006 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Output shaft to rear differential drive flange (Torx screw with ribbed teeth) |
E81 / E82 / E87 / E90 / E91 / E92 / E93 | M8 | Replace screws | 52 Nm |
| E81 / E82 / E84 / E87 / E88 / E90 / E91 / E92 / E93 | M10 ZNS3 | Replace screws | 70 Nm | |
| E87 | M10 ZNS | Replace screws | 80 Nm | |
| E90 / E92 / E93 / S65 | M12 | Replace screws | 120 Nm |