31 21 Wheel Bearings and Steering Knuckle
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2007 BMW 335xi, and 2007 BMW 335i. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL BEARINGS AND STEERING KNUCKLE
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Wheel bearing to swivel bearing | E81 / E82 / E87 / E88 / E90 / E91 / E92 / E93 | M12 | Replace screws | 110 Nm |
| E84 | M12 | Replace screws Jointing torque |
80 Nm | |
| Torque angle | 90 ° | |||
| 2AZ Drive flange to axle shaft | E90 / Allrad, E91 / Allrad, E92 / Allrad | M27 | Replacing collar nut, lightly oil contact face | 420 Nm |
| E84 | M16 | Replace collar screw and spring. No oil is permitted on the collar screw. | ||
| Jointing torque | 210 Nm | |||
| Torque angle | 90 ° |