24 32 Governor
WARNING: This page is about a different car, the 2006 BMW 330xi, 2006 BMW 330i, 2006 BMW 325xi, 2006 BMW 325i, and 2006 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
GOVERNOR TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Governor flange to transmission A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | M8 | 16 Nm | ||
| 2AZ Threaded pin to centrifugal governor | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 3 Nm | |
| 3AZ Hexagon nut to threaded pin | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | 10 Nm | ||
| 4AZ Hexagon head screw on centrifugal governor | A4S 200R / A4S 270R / A4S 310R / A5S 300J / A5S 310Z / A5S 325Z / A5S 440Z / A5S 560Z / A5S 360R / A5S 390R / GA6HP19Z / GA6HP26Z / GA6HP32Z | M6 | 11 Nm | |
| 5AZ Governor housing to hub | 4HP-22H | M6 | 11 Nm |