23 41 External Gearshift Components
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 BMW Z4, 2006 BMW M Roadster, 2006 BMW M Coupe, 2006 BMW 330xi, and 2006 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
EXTERNAL GEARSHIFT COMPONENTS TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Servomotor / actuator to transmission housing Insert screws with screw securing adhesive | D / G / H SMG transmission | M6 | 10 Nm | |
| 2AZ Switch for gear recognition to servomotor | D SMG transmission | M5 | 6 Nm | |
| 3AZ Hydraulic lines to servomotor | D SMG transmission | M12x1 | 17 Nm | |
| 4AZ Actuator to transmission casing | D SMG transmission | M8 | 25 Nm | |
| 5AZ Reversing light switch | B / C / D / E / F / G / H / I / J-transmission | M12 | 18 Nm | |
| 6AZ Pressure accumulator to valve block | C / G / H SMG transmission | 30 Nm | ||
| 7AZ Protective plate Expansion tank Shift actuator Hydraulic pump Valve block to transmission housing Ground strap to transmission housing |
C / G / H SMG transmission | M6 | 10 Nm | |
| 8AZ Protecting plate / valve block to transmission housing / | C / G / H SMG transmission | M8 | 20 Nm | |
| 9AZ Valves to valve block | C / G / H SMG transmission | M4 | 3.5 Nm | |
| 10AZ Pressure sensor to valve block | C / G / H SMG transmission | 15 Nm | ||
| 11AZ Shift/selector sensor to transmission housing | C / G / H SMG transmission | M4 | 2.8 Nm | |
| 12AZ Retaining screw for hydraulic line | C / G / H SMG transmission | 18 Nm | ||
| 13AZ Banjo bolt for hydraulic line | C SMG transmission | 16 Nm | ||
| 14AZ Heat shield to expansion tank/pump bracket | H transmission | 6 Nm | ||
| 15AZ Clutch speed sensor | G / H-transmission | 35 Nm | ||
| 16AZ Transmission oil cooler to transmission | E60 / E63 / E64 | 7-speed SMG M6x35 | 10 Nm | |
| 17AZ Transmission oil screen in transmission oil cooler | E60 / E63 / E64 | 7-speed SMG M18 | 25 Nm | |
| 18AZ Banjo bolt to transmission oil cooler | E60 / E63 / E64 | 7-speed SMG M16x1.5 | 40 Nm | |
| 19AZ Union nut to screwed socket | E60 / E63 / E64 | 7-speed SMG | 40 Nm | |
| 20AZ Oil cooler connection to transmission oil cooler | E60 / E63 / E64 | 7-speed SMG | 40 Nm | |
| 21AZ Oil pump to transmission oil cooler | E60 / E63 / E64 | 7-speed SMG M6x20 | 10 Nm | |
| 22AZ Speed sensor to transmission | E60 / E63 / E64 | 7-speed SMG M6x16 | 10 Nm | |
| 23AZ Temperature and pressure sensor to hydraulic unit | E60 / E63 / E64 | 7-speed SMG | 15 Nm | |
| 24AZ Clamp, pressure accumulator to transmission | E60 / E63 / E64 | 7-speed SMG | 22 Nm | |
| 25AZ Pressure accumulator to pump block | E60 / E63 / E64 | 7-speed SMG | 29 Nm | |
| 26AZ Pump block to transmission | E60 / E63 / E64 | 7-speed SMG | 22 Nm | |
| 27AZ Banjo bolts, pressure lines clutch actuator and pump block | E60 / E63 / E64 | 7-speed SMG | 25 Nm | |
| 28AZ Screws, actuator block | E60 / E63 / E64 | 7-speed SMG | 25 Nm | |
| 29AZ Union nut, hydraulic line, actuator block | E60 / E63 / E64 | 7-speed SMG | 11 Nm | |
| 30AZ Pump to electric motor | E60 / E63 / E64 | 7-speed SMG | 5 Nm | |
| 31AZ Electric motor to pump block | E60 / E63 / E64 | 7-speed SMG | 5 Nm |