21 21 Clutch Disc and Drive Plate
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH DISC AND DRIVE PLATE TIGHTENING SPECIFICATION
| Type | Thread | Work instruction | Measure | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 8.8 | Replace screws | 25 Nm |
| E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 10.9 | Replace screws | 34 Nm | |
| Clutch to flywheel With ZNS bolts | Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | |||
| E60 S85 | Jointing torque | 15 Nm | ||
| Torque angle | 25° | |||
| E60 N52 M47T2, E61 N52 /M47T2, E63 N52, E64 N52, E65 N52, E83 N52 /M47T2, E85 N52, E86 N52, E90 N52 /M47T2, E91 N52 /M47T2, E92 N54, E81 N47 | M8 10.9 | Jointing torque | 15 Nm | |
| Torque angle | 90° ± 5° |