LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1098 (Engine Electrical System - Tightening Torques) >> Engine Wiring Loose >> 12 52 Plug connections, terminals, loose parts

12 52 Plug connections, terminals, loose parts

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2006 BMW 330xi, and 2006 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTIONS, TERMINALS, LOOSE PARTS TIGHTENING SPECIFICATION

  Type Thread Tightening specification Measure
1AZ Wiring harness to cylinder head N52 M6   8 Nm
2AZ Cable duct to cylinder head cover N52, N54, N53 M6 Replace screws  
      Jointing torque 4 Nm
      Torque angle 90 °
3AZ Ground cable to crankcase (electr. coolant pump) N52, N54, N52K, N51, N53 M8 Replace screws  
      Jointing torque 8 Nm
      Torque angle 45 °