11 62 Exhaust manifold
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2008 BMW Z4, 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, and 2007 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
EXHAUST MANIFOLD TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to cylinder head Coat screw connections with CRC copper paste | All | M6 | Replace nuts | 10 Nm |
| M50 / M52 / M52TU / M54 / M56 / S52 / S50 US | M7 | Replace nuts | 20 Nm | |
| All / others | M7 | Replace nuts | 15 Nm | |
| M10 | M8 | Upper row of staybolts installed with bolt cement | ||
| 23 Nm | ||||
| M21 | M8 | 12 Nm | ||
| Replace nuts Retighten after 2000 km Slacken nuts by a 1/4 turn |
||||
| 12 Nm | ||||
| M41 / M47 / M47TU / M51 / M57 / M57TU | M8 | Replace nuts | 20 Nm | |
| All / others | M8 | Replace nuts | 23 Nm |