11 51 Water Pump and Drive (N52)
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2008 BMW Z4, 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, and 2007 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
WATER PUMP AND DRIVE TIGHTENING SPECIFICATION
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Water pump to crankcase |
N52 |
M8x32 |
Replace screws
Thread repairs exclusively with Al Helicoil.
Jointing torque and angle of rotation must be observed without fail. |
|
| |
|
|
Jointing torque |
10 Nm |
| |
|
|
Torque angle |
90 ° |