11 36 Variable Camshaft Control (N52)
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2008 BMW Z4, 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, and 2007 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
VARIABLE CAMSHAFT CONTROL TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS with sensor gear on in. & ex. camshafts | N52 | M10x94 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N52 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N52 | M6x12 | 10 Nm |