11 28 V-ribbed belt with Tension and Deflection Element (N52)
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2008 BMW Z4, 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, and 2007 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
V-RIBBED BELT WITH TENSION AND DEFLECTION ELEMENT TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Belt tensioner to engine block | N52 | M11x65 | Replace screw Thread repairs exclusively with Al Helicoil. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 25 Nm | |||
| Torque angle | 90 ° | |||
| 2AZ Deflection pulley to alternator | N52 | M10x40 | 40 Nm |