11 11 Engine Block, Cylinder Crankcase N52 B30
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2007 BMW 530xi, 2007 BMW 530i, and 2007 BMW 525xi. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE - TECHNICAL DATA (11 11 ENGINE BLOCK, CYLINDER CRANKCASE N52 B30)
| Bore ø stage 0 (1) | mm | 85.007+0.007 | ||
| Bore ø stage 00 (1) | mm | |||
| Bore ø stage 1 (1) | mm | 85.250+0.007 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.005 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||