12 31 ... Replacing alternator belt pulley

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2008 BMW Z4, 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, and 2007 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

12 7 110

Remove and install alternator drive belt.

Depending on alternator type, grip shaft with:

hexagon socket
multi-tooth socket or
Torx socket wrench

Fig 1: Identifying Special Tool (12 7 110)
Courtesy of BMW OF NORTH AMERICA, INC.

Release nut with special tool 12 7 110.

Installation:

For tightening torque refer to 12 31 2AZ / 12 31 3AZ in ALTERNATOR WITH DRIVE .