11 22 513 Replacing roller bearing for dualmass flywheel (Manually)
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 5 500
- 11 2 010
- 11 2 343
- 11 2 350
NOTE:
Flywheel removed!
Position special tool 11 2 010 in roller bearing.
Twist out roller bearing with special tool 11 2 343.
Fig 1: Identifying Position of Special Tools (11 2 010) And (11 2 343) To Twist Out Roller Bearing From Dual-Mass Flywheel
Assemble special tools 11 2 350 and 00 5 500.
Drive in roller bearing with special tools 11 2 350 and 00 5 500 in direction of arrow as far as it will go.
Fig 2: Positioning Special Tools (11 2 350) And (00 5 500) To Drive Roller Bearing Into Dual-Mass Flywheel
Assemble engine.