22 32 050 Replacing cross-member for transmission mounting

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2006 BMW 330xi, and 2006 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove underbody protection
Support transmission with lifter.

Unfasten screws (1) and nuts (2).

Remove transmission cross-member.

Tightening torque 24 71 1AZ/2AZ.