22 31 001 Replacing rubber mount for transmission mounting
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2006 BMW 330xi, and 2006 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear underbody protection.
- Support transmission with lifter.
Remove screws and nuts.
Remove transmission cross-member (1).
Remove rubber mount from transmission crossmember.
Tightening torque 23 71 1AZ/2AZ.