23 11 608 Replacing guide tube for clutch release unit (GS6-17BG/DG)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 328xi, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove Transmission
- Remove Clutch Controller and release lever from guide tube.
Unfasten screws.
Remove guide tube.
For tightening torque refer to 23 11 2AZ in HOUSING WITH COVER .
Installation:
Replace screws.
Clean new guide tube.
Guide surface must be clean (no labels/stickers or residual adhesive, etc.).