32 41... Instructions for removing and installing ear clips

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

32 1 260

NOTE: The work steps are show on assorted components.

Ear clip must always be replaced.

To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.

Fig 1: Identifying Special Tool (32 1 260)

G04726374

Courtesy of BMW OF NORTH AMERICA, INC.

The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.

Fig 2: Identifying Ear Clip

G04726375

Courtesy of BMW OF NORTH AMERICA, INC.

Attach hook fastener and press ear together with special tool 32 1 260.

Fig 3: Identifying Special Tool 32 1 260 (1 Of 2)

G04726376

Courtesy of BMW OF NORTH AMERICA, INC.

Side cutter of special tool 32 1 260 can be used in areas which are difficult to access.

Fig 4: Identifying Special Tool 32 1 260 (2 Of 2)

G04726377

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Gap (A) max. 1 mm!

Fig 5: Identifying Ear Clip Gap

G04726378

Courtesy of BMW OF NORTH AMERICA, INC.