61 31 996 Carry out steering angle sensor adjustment
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function "Initial Operation/Adjustment For Active Front Steering " and must not be carried out separately!
NOTE:
Steering angle sensor adjustment must be carried out:
- after adjustment work on the front axle/steering
- after all mechanical work on the steering system
- E46 (AWD), E53, E83: after disconnection of battery
- after replacement / coding / programming of the following components:
- Fixture for switches of steering column / switch cluster / steering angle sensor
- Dynamic Stability Control (DSC) control unit
- Active anti-roll stabilization (ARS)
Connect vehicle to BMW diagnosis system or Software Service Station.
Select and carry out steering angle sensor adjustment under Service functions.