51 47 491 Removing and installing/replacing rear underbody protection: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 335i, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 335i, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Single-part underbody protection (without E90/E91/E92 AWD):
Release screws (1).
Pull underbody protection (2) in direction of arrow out of bracket (3).
Installation:
Ensure correct seating.
Centre underbody protection (2) and tighten down screws (1).