34 21 171 Removing and installing / replacing a brake carrier / brake guard at rear
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove expander lock
- Remove wheel hub
Release screws (1).
Installation:
For tightening torque refer to 34 21 3AZ in 34 21 REAR BRAKE .
Release screws (2) and remove brake carrier (3).
Installation:
For tightening torque refer to 34 21 3AZ in 34 21 REAR BRAKE .