34 11 250 Removing and installing / replacing a brake carrier / brake guard plate at front
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove Front Brake Disks
Release screws (1) and remove brake guard plate (2).
Installation:
For tightening torque refer to 34 11 3AZ in 34 11 FRONT BRAKE .