36 11 533 Removing and installing / replacing RDC wheel electronics: Notes
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 2 190
NOTE:
If a tyre sealant has been used, replace the wheel electronics.
When a tyre has been removed, do not clean the rim with installed wheel electronics with high-pressure cleaning equipment.
Do not treat wheel electronics with solvents, cleaning agents etc. If dirty, wipe with a clean cloth only.
Do not clean wheel electronics with compressed air.
IMPORTANT:
If the wheel electronics have been removed, the complete valve must be replaced.
Necessary preliminary tasks:
- Remove Tyre