41 62 520 Left Or Right Hinge For Rear Lid Removal And Installation Or Replacement (Rear Lid Removed)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
Read contents of Body, General.
Release screws (1).
For tightening torque refer to 41 62 3AZ.
Remove hinge (2).
Adjust rear lid on the basis of the body BODY GAP DIMENSIONS (E90) and BODY GAP DIMENSIONS (E91) .
Replacing hinge only:
Remove Gas-Filled Strut for rear lid.