51 71... MULTIFUNCTION Pan Removal And Installation Or Replacement

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove Left And Right Luggage Compartment Wheel Arch Trims

Release screws (1).

Remove guide (2).

Fig 1: Identifying Guide And Screws

G04726868

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Identifying Screw

G04726869

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove cover (2).

Fig 3: Identifying Cover And Mounting Screw

G04726870

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and remove multifunction pan.

For tightening torque refer to 51 71 9AZ in 51 71 SEALS AND LOOSE BODY PARTS .

Fig 4: Identifying Pan Mounting Nuts

G04726871

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seals (1) on multifunction pan (2) must be replaced each time they are removed.

Fig 5: Identifying Seals And Pan

G04726872

Courtesy of BMW OF NORTH AMERICA, INC.