52 13 198 Removing and installing/replacing rear panel on left or right front seat backrest

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Release clips (1) with diagonal cutting pliers.

Remove rear panel (2) downwards with a turning action.

NOTE: Remove remnants of clips.

Fig 1: Identifying Rear Panel And Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining hooks (1) and bore holes (2) on rear panel (3) must not be damaged.

Replace faulty clips.

Fig 2: Identifying Retaining Hooks, Bore Holes And Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.