54 12 115 Removing and installing glass slide/tilt sunroof lid
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove Gaiter
Release left and right screws (1).
Lift glass slide/tilt sunroof lid upwards to remove.
Installation:
Replace screws and insert with Loctite.
Adjust glass slide/tilt sunroof lid.
For tightening torque refer to 54 12 2AZ in 54 12 MECHANICAL SUN ROOF COMPONENTS .
Initialize glass slide/tilt sunroof.