61 71 100 Removing and installing/replacing windscreen washer pump

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Drain fluid reservoir for windscreen washer system.

Necessary preliminary tasks:

Remove right Wheel Arch Cover
Release Fluid Reservoir For Windscreen Washer System and pull out

Unfasten plug connection (2) and disconnect.

Detach hose from windscreen washer pump (1).

Turn windscreen washer pump (1) if necessary and pull in direction of arrow out of fluid reservoir for windscreen washer system.

Fig 1: Identifying Windscreen Washer Pump And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Coat sealing ring of windscreen washer pump with antiseize agent.

Ensure hose is laid without kinks.