61 61 041 Replacing both windscreen wiper blades

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Make sure the wiper arm does not contact the windscreen without its wiper blade.

Fold wiper arm (3) away from windscreen.

Press lock (1) and remove cover cap (2) in direction of arrow.

Installation:

Make sure cover cap (2) is correctly seated.

Fig 1: Identifying Cover Cap, Wiper Arm And Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Turn windscreen wiper blade (1) at an angle of 90° and remove from windscreen wiper arm (2).

Fig 2: Identifying Windscreen Wiper Blade And Windscreen Wiper Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guide (2) of window cavity cover cap (6) must not be damaged or missing.

Fig 3: Identifying Catches, Guide And Window Cavity Cover Cap

Courtesy of BMW OF NORTH AMERICA, INC.