61 35 095 Removing and installing / replacing control unit for seat heating
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection) .
NOTE:
Move seat completely towards rear/top.
Unlock plug connections (1) and disconnect.
Open lock (2) and remove control unit for seat heating (3) in direction of arrow.
Installation:
Make sure control unit for seat heating (3) is correctly engaged.
Replacement:
Carry out Programming/Coding.