61 31 115 Replacing rocker switch for side window operation (switch cluster, front)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

IMPORTANT: Carry out the following work step carefully in order to avoid damaging door trim panel and rocker switch.

Carefully lever out rocker switch for side window operation (1) with special tool 00 9 340 at specified points (2).

Remove rocker switch for side window operation (1) from door trim panel (3) slightly.

Disconnect associated plug connection and remove rocker switch for side window operation (1).

Fig 1: Identifying Special Tool (00 9 340), Rocker Switch Clips Points And Door Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining clips (1) of rocker switch for side window operation (2) must not be damaged or missing.

Make sure rocker switch for side window operation (2) is correctly seated.

Fig 2: Identifying Side Window Rocker Switch And Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.