62 11 280 Removing and installing (replacing) instrument cluster

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION ).

NOTE: Extend steering wheel completely and lower.

Release screws (1).

Tightening torque, see 62 13 1AZ GAUGES AND INSTRUMENT PANELS - TIGHTENING TORQUES -- 325I .

Fold back instrument cluster (2) in direction of arrow and pull back slightly.

Unlock associated plug connection and disconnect.

If necessary, feed out/unclip associated wiring harness.

Remove instrument cluster (2).

Fig 1: Removing Instrument Cluster And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding.

Check values for CONDITION BASED SERVICE (CBS) , replace if necessary.