67 16 011 Removing and installing/replacing left vertical aim adjuster (xenon headlight)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Version with xenon headlights: Danger to life due to high voltage!
Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (control unit, ignition unit with lamp) may only be carried out by specialist personnel.
Necessary preliminary tasks:
- Remove Wheel Arch Cover At Front
NOTE:
For purposes of clarity, following illustrations show headlight removed.
Release catches (1) and remove protective cap (2).
Disconnect plug connection (1).
Turn vertical aim adjuster (2) to left and feed out of fixture.
Installation:
Slide headlight insert (1) upwards in direction of arrow.
Feed ball head of vertical aim adjuster (1) into mounting (2).
After installation: