64 11 905 Removing and installing/replacing ventilation temperature sensor

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2008 BMW 323i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove decorative strip on instrument panel on right

NOTE: For purposes of clarity, the following graphics show the heater/air conditioner removed.

Pull temperature sensor (1) out of retaining lug (2).

Installation:

Make sure rubber ring is correctly seated.

Fig 1: Identifying Ventilation Temperature Sensor And Retaining Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove temperature sensor (2).

Fig 2: Identifying Temperature Sensor And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.