LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1054 (Electrical Drives - Repair - E90/E91) >> 16 Servo/Positioning Drive >> 67 16 016 Removing and installing/replacing right headlight vertical aim adjuster (xenon headlight)

67 16 016 Removing and installing/replacing right headlight vertical aim adjuster (xenon headlight)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Xenon headlights: Danger to life due to high voltage! Therefore disconnect xenon headlights from the power supply.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.

Necessary preliminary tasks: 

NOTE: For purposes of clarity, following illustrations show headlight removed.

Release catches (1) and remove protective cap (2).

Fig 1: Identifying Protective Cap And Catches
G04727718Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Turn vertical aim adjuster (2) to left and feed out of fixture.

Fig 2: Identifying Vertical Aim Adjuster And Plug Connection
G04727719Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Slide headlight insert (1) upwards in direction of arrow.

Fig 3: Installing Headlight
G04727720Courtesy of BMW OF NORTH AMERICA, INC.

Feed ball head of vertical aim adjuster (1) into mounting (2).

Fig 4: Identifying Ball Head Vertical Aim Adjuster And Mounting
G04727721Courtesy of BMW OF NORTH AMERICA, INC.

After installation: