LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1030 (Wheel And Tires - Service Information) >> Storing wheels and tires >> Wheels/Tires - General Notes >> Wheel/Tyre Storage Requirements

Wheel/Tyre Storage Requirements

WARNING: This page does not describe the selected car, but rather 228 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2012 BMW 750i, 2012 BMW 750Li, and 2011 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tyre fitted to wheel 

    Do not store upright... 

    NOTE: If storing the wheels upright cannot be avoided, the inflation pressure must be increased to 3.5 bar.
    Fig 1: Use Care When Storing Wheel/Tyre Storage In Upright Position (Tyre Fitted To Wheel)
    G03179545Courtesy of BMW OF NORTH AMERICA, INC.

    ... but rather hang... 

    Fig 2: Preferred: Store Tires In Hanging Position (Tyre Fitted To Wheel)
    G03179546Courtesy of BMW OF NORTH AMERICA, INC.

    ... or stack. 

    NOTE: Never store tires on the ground.
    Use a wooden palette or similar.
    Fig 3: Storing Tires In Stacked Position (Tyre Fitted To Wheel)
    G03179547Courtesy of BMW OF NORTH AMERICA, INC.
  2. Tires Not Fitted 

Do not stack... 

Fig 4: DO NOT Store Wheel/Tyre In Staked Position (Tires Not Fitted)
G03179548Courtesy of BMW OF NORTH AMERICA, INC.

... do not hang... 

Fig 5: DO NOT Store Wheel/Tyre In Hanging Position (Tires Not Fitted)
G03179549Courtesy of BMW OF NORTH AMERICA, INC.

... but rather store them upright and turn them every 4 weeks. 

NOTE: Never store tires on the ground.
Use commercially available shelves.
Fig 6: Preferred: Store Tires In Staked Position (Tires Not Fitted)
G03179550Courtesy of BMW OF NORTH AMERICA, INC.