7.2 Preparatory Work
WARNING: This page does not describe the selected car, but rather 228 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2012 BMW 750i, 2012 BMW 750Li, and 2011 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Before commencing the measurement, preparatory work must be carried out at the measuring area and on the vehicle (see BMW KDS operating instructions). Preparatory work includes:
- Easy-running rotating and sliding plates
- Aligning the rotating and sliding plates in relation to the track width and wheelbase
- Centering the vehicle on the plates
- Applying the parking brake
- Removing the lock pins on the plates to prevent tension in the chassis under loading
- Checking the rim and tire size, tread depth, tire pressure, steering wheel play, wheel bearings and condition of suspension and shock absorbers
- Fastening the measuring equipment to the wheels
- Loading the vehicle according to BMW KDS specifications
- Rock the vehicle firmly with the brakes released to ensure a stable center position
- Lock the service brake using the brake clamping device